Temporary Road Studs

Our self adhesive temporary road studs are two way reflective studs, Amber in colour.

Temporary road studs have been designed for use in temporary traffic management schemes, on edge of carriageways, buffer zones or as lane line markings. The studs will give good performance on all types of surfaces, where they can be removed after works leaving little or no adhesive marks on the road surface. Ensure the road surface is dry, free of dust and loose material before application. If the road
surface is at a temperature of less than 5°C, or if it is wet, it should be warmed carefully by a road heater so that, when the material is laid, the surface temperature is above 5° C and the surface is dry to ensure adhesion.